Table of Contents
Advertisement
RF coaxial connection
Connect the RF.OUT jack on the DVD+VCR to the
antenna in jack on the TV using the supplied 75-ohm
Coaxial Cable (R).
How to set the DVD+VCR's RF output chan-
nel
1. When the DVD+VCR is turned off, press and hold
CH (V/v) on the front panel for more than five
seconds. "RF03" or "RF04" appears in the display
window.
2. Press CH (V/v) to change the RF output channel
(CH 03 or CH 04). Tune the TV to this channel.
3. Turn off the DVD+VCR.
Audio/Video connection
1. Connect the DVD/VCR VIDEO OUT jack on the
DVD+VCR to the video in jack on the TV using
the video cable supplied (V).
2. Connect the Left and Right DVD/VCR AUDIO
OUT jacks on the DVD+VCR to the audio left/right
in jacks on the TV (A1) using the supplied audio
cables.
N o t e :
If you use this connection, set the TV's source selector to
VIDEO.
Optional TV Connections
Optional TV Connections
These connections support only DVD playback. The
tuner and VCR still output through the RF.OUT (R) or
DVD/VCR OUT (A, V) jacks.
When using the COMPONENT/PROGESSIVE SCAN
VIDEO OUT jacks, set the Video Output to "YUV" on
the setup menu. When using the S-VIDEO OUT jack,
set the Video Output to "S-VIDEO" on the setup
menu. (see page 17)
S-Video connection
1. Connect the S-VIDEO OUT jack on the
DVD+VCR to the S-Video in jack on the TV using
the optional S-Video cable (S).
2. Connect the Left and Right AUDIO OUT jacks of
the DVD+VCR to the audio left/right in jacks on
the TV using the supplied audio cables (A2).
12
Component Video (Color Stream
Progressive Scan (ColorStream
connection
If your television is a high-definition or "digital
•
ready" television, you may take advantage of the
DVD+VCR's progressive scan output for the high-
est video resolution possible.
If your TV does not accept the Progressive Scan
•
format, the picture will appear scrambled if you try
Progressive Scan on the DVD+VCR.
1. Connect the COMPONENT/PROGRESSIVE
SCAN VIDEO OUT jacks on the DVD+VCR to the
corresponding in jacks on the TV using an option-
al Y Pb Pr cable (C).
2. Connect the Left and Right AUDIO OUT jacks of
the DVD+VCR to the audio left/right in jacks on
the TV (A2) using the supplied audio cables.
Notes:
•
Set the Progressive Scan to "On" on the setup menu for
progressive scan signal, see page ??.
•
When you use Component Video signal, set the
Progressive Scan to "Off" on the setup menu.
•
Progressive scan does not work with the analog video
connections (yellow VIDEO OUT jack and S-VIDEO
OUT jack).
Sound Connection for DVD
You can ONLY listen to DVD playback using OPTI-
CAL (O), COAXIAL (X) and AUDIO OUT (A2) con-
nections. The tuner and VCR will still be heard
through the RF.OUT (R) or DVD/VCR AUDIO OUT
(A1) jack. (See page 14.)
Connecting to an amplifier equipped with two
channel analog stereo or Dolby Surround
Connect the Left and Right AUDIO OUT (or
DVD/VCR AUDIO OUT) jacks on the DVD+VCR to
the audio left and right in jacks on your amplifier,
receiver, or stereo system using the audio cables
(A1, A2) supplied.
®
) /
pro)
®
Advertisement
Table of Contents
