Flush Before Using Equipment; Equipment - Graco e-Xtreme Operation, Repair, And Parts

Install Vented Vented Oil Oil Cap
Install Install Vented Oil

Equipment

Equipment Equipment
The driver gear box is shipped from the factory
pre-filled with oil. The temporary unvented cap (PX)
prevents oil leaks during shipment. This temporary
cap must be replaced with the supplied vented oil
cap (P) before use.
ti31010a
3A3164D
Cap Before Before Using Using
Cap Before Using
Flush Before Before Using Using Equipment
Flush Flush Before Using
The pump fluid section was tested with lightweight
oil, which is left in the fluid passages to protect parts.
To avoid contaminating your fluid with oil, flush the
equipment with a compatible solvent before using
the equipment.
See Prime/Flush, page
Installation
Equipment
Equipment
13.
9