Conference Calls; Leaving A Conference - Samsung DCS KEYSET User Manual

Samsung DCS

Conference Calls

You may connect up to five parties (you and four others) in a confer-
ence call, in any combination of outside lines and internal extensions
in any order.
1. While engaged in a conversation, press the
signed), or the
You receive conference tone.
2. Make another call (internal or outside) and press the
or the
CONF
tone.
3. Make another call or press the
the key to join all parties.
TRSF
4. Repeat step 3 until all parties are added.
Note: When attempting to add another party to the conference and you are not able
to reach the desired person, hang up. Press the
previous conversation.
To drop a party from your conference call:
1. Press the
CONF
line number that is to be dropped.
2. Press the
CONF
conference without the dropped number.

Leaving a Conference

To leave a conference, hang up. Control is passed to the next internal
extension. If there are no internal extensions and you wish to leave
outside lines connected together in a trunk to trunk conference, press
the key then the
CONF
the instructions to drop a party (above) using your extension number.
When outside callers hang up, the lines will release automatically.
Press the
CONF
soft key, or press the
CONF
soft key, or the
key or the
key or the
CALL
key to rejoin a trunk to trunk conference.
key and receive conference
TRSF
key, or the
CONF
CONF
soft key and dial the extension or
CONF
soft key again to re-establish the
CONF
key that the call appears on, or follow
– 22 –
Keyset User Guide
key (if as-
CONF
key and dial 46.
TRSF
CONF
soft key, or
CONF
key again to return to your
key,