Internal calls, also called intercom calls, always appear on your
CALL
keys and always light green. You can have up to eight
keys (or
CALL
up to five on Compact II systems), but two are recommended.
Outside calls appear on individual
keys, if these are assigned. If
DTS
an individual line is not assigned to its own key, it will appear on a
key. Your outside calls will light green on your keyset and red
CALL
on other keysets.
You never lose sight of your calls while they are on hold. They stay
right where you put them and are identified with a green flashing
light.
Some simple rules to remember:
• • • • Any steady
indicates the line or feature is in use.
LED
• • • • A fast flashing green
indicates a new call ringing in.
LED
• • • • A slow flashing green or red
indicates a call is on hold.
LED
• • • • A slow flashing amber
indicates a recall to your keyset.
LED
Speakerphone
Pressing the
key will answer or release a call on the speak-
ANS/RLS
erphone.
Switching from the handset to the speakerphone is easy. Press the
key and replace the handset.
SPEAKER
Volume Controls
DCS keysets use the
Up and Down (+ and –) keys to adjust
VOLUME
the ringer volume while the keyset is ringing, the speaker volume
while the speakerphone is in use and the handset volume while you
are listening. These three levels will be stored in memory until
changed. If background music is turned on at your keyset, the volume
keys will also control the level of music. The volume of pages heard
– 3 –