Siemens SIMATIC ET 200SP Manual page 20

Technical specifications
6.1 Technical specifications
Electrical isolation
Electrical isolation of channels
Between the channels
Between the channels and the backplane bus
Between the channels and the supply voltage of the
electronics
Permitted potential difference
Between different circuits
Insulation
Insulation tested with
Degree of protection and protection class
IP (rear)
Standards, approvals, certificates
Use in hazardous areas
Explosion protection category for gas
Associated equipment (Ex ia)
Associated equipment (Ex ib)
Environmental conditions
Operating temperature
Horizontal installation, min.
Horizontal installation, max.
Vertical installation, min.
Vertical installation, max.
Dimensions
Width
Weights
Weight, approx.
Information for market places
Digital inputs/outputs, configurable
20
Yes
Yes
Yes
75 VDC / 60 VAC (basic isolation)
707 VDC (type test)
IP20
ATEX II 3 G Ex nA IIC T4 Gc
No
No
0 ℃
60 ℃
0 ℃
50 ℃
20 mm
40 g
Yes
Digital output module RQ 4x120VDC-230VAC/5A NO ST (6ES7132-6HD00-0BB0)
6ES7132-6HD00-0BB0
Manual, 07/2014, A5E03576775-AB