How To Set The Clock Manually; How To Set And Arm The Alarms - Oregon Scientific BAR122HGN User Manual

- Strong
- Weak
- No signal
- Receiving
If you wish to disable the auto-reception feature, press the [ TIME /
] button for three seconds. The radio reception signal [
disappear. The unit will not respond to radio signals.
To enable the feature again, press the [ TIME /
seconds.
The radio reception signal [ ] will start blinking to initiate reception
automatically.

HOW TO SET THE CLOCK MANUALLY

To set the clock manually, hold [ MODE/SET ] for three seconds.
The hour digits will blink.
Press [ TIME /
the button to increase or decrease the value rapidly.
Press [ MODE/SET ] to confirm. The minute digits will blink.
Repeat the same procedure to set the minutes, current day, month,
display language, weekday and hour offset for the 2nd time zone.
Note: The time and date are displayed in 24-HOUR clock format.
For the language display, you can choose among English (E), German
(D), French (F) and Italian (I). Weekday is in the usual sequence of
Monday through Sunday.
For the 2nd time zone, which is indicated by the ZONE icon, enter
the hour offset using the [ TIME /
and the BAR122HGN will calculate the second zone-time
accordingly.
If there is an item you do not wish to change, simply press [ MODE/
SET ] to bypass the item.
When you are done, press [ MODE/SET ] to exit. The display will
] will
return to the mode last chosen.
] button for three

HOW TO SET AND ARM THE ALARMS

The BAR122HGN has two alarms, ALARM 1 and ALARM 2. They
can be invoked together or independently.
To set an alarm:
1.
Press [
select ALARM 2. T
displayed. If you have never set the alarm before, the time will be
displayed as 0:00.
2. Press [
blink.
11
] or [ TIME / ] select the hour. Keep pressing
] and [ TIME /
] once to select ALARM 1 or again to
he last selected time of the alarm will be
] for three seconds. The hour digits will
] buttons