Weather forecast multi-channel in/out thermometer with 433mhz cable free sensor and radio controlled calendar clock (21 pages)
Summary of Contents for Oregon Scientific BAR112
Page 1
USER’S MANUAL INTRODUCTION Congratulations on your purchase of the Weather forecaster with cable free sensor and radio-controlled calendar clock (BAR112). A multifunction device, this unit has a large four-line liquid crystal display (LCD) for displaying weather forecast information, in/outdoor temperatures, a radio frequency (RF) controlled calendar clock, time zone adjusted time, and dual daily alarms.
Page 2
Sets the remote sensor channel. A . FRONT DISPLAY A four line easy-to-read LCD each with specific purposes that B2. [MEM] BUTTON relate to weather forecasting, temperature, or clock / calendar Displays minimum and maximum temperature readings, and / alarm functions. erases memory data A1 .
A. LED INDICATOR MAIN FEATURES: Flashes when the remote sensor transmits a reading REMOTE SENSOR UNIT B. CHANNEL SLIDE SWITCH Designates the remote sensor Channel The remote sensor is a wireless independent component. Its function C. RESET BUTTON is to monitor temperatures at a location other than the location of Returns all settings to default values the main unit.
BATTERY INSTALLATION: BATTERY INSTALLATION: MAIN UNIT REMOTE UNIT 1. Gently lift the tab on the battery compartment door. 2. Insert four UM-3 or “AA” size alkaline batteries. The remote unit uses two UM-4 or “AAA” size alkaline batteries. Installation: 3. Replace the battery compartment door. 1.
Page 5
MAXIMUM AND MINIMUM TRANSMISSION COLLISION TEMPERATURES Signals from other household devices, such as door bells, home security systems and entry controls, may interfere with those of The maximum and minimum recorded temperatures will be this product and cause temporarily reception failure. This is normal automatically stored in memory.
ALARM SET [ ] button is pressed. CALENDAR CLOCK DISPLAY MODES The BAR112 supports four time display modes in the sequence of: ABOUT RADIO RECEPTION MODE 1. Hour-Minute-Second (of local time) The BAR112 is designed to automatically synchronize its calendar...
When you are done, press MODE/SET to exit. The display will reception automatically. return to the mode last chosen. HOW TO SET AND ARM THE ALARMS The BAR112 has two alarms, ALARM 1 and ALARM 2. They can be invoked together or independently.
To set an alarm: NOTE ON OUTDOOR-REMOTE Press [ ] once to select ALARM 1 or again to select ALARM 2 TEMPERATURE the last selected time of the alarm will be displayed. If you have never set the alarm before, the time will be displayed as 0:00. Once batteries are in place in the remote unit, it will start 2.Press [ ] for three seconds.
HOW TO WALL-MOUNT OR USE THE MAINTENANCE TABLE STAND When handled properly, this unit is engineered to give you years of satisfactory service. Here are a few product care instructions: The unit can be wall-mounted using its recessed screw holes or place on a flat surface by attaching the table stand.
Dimension SPECIFICATIONS Main unit : 161 x 87 x 28 mm Temperature Measurement (L x Wx D) Main unit Remote sensing unit : 92 x 60 x 21mm (L x Wx D) Indoor Temperature measurement Proposed operating range : -5.0°C to +50.0°C NOTE ON COMPLIANCE (23.0°F to 122.0°F) Temperature resolution...
Page 11
! Reorient or relocate the receiving antenna. ! Increase the separation between the equipment and receiver. ! Connect the equipment into an outlet on a circuit different from that to which the receiver is needed. ! Consult the dealer of an experienced radio/TV technician for help.
Page 12
MODEL: BAR112 DIGITAL WEATHER FORECASTER WITH REMOTE THERMO - SENSOR AND RADIO CONTROLLED CLOCK Instruction Manual **** Mode D'emploi **** Bedienungsanleitung **** Manuale di Istruzioni **** Instrucciones de Funcionamiento...