Shredder Blade - Echo ES250 Operator's Manual

ES-250
3. Check idle speed and reset if necessary. If a tachometer is available,
idle speed screw (A) should be set to the specifications found on
"Specifications" Page of this manual. Turn idle screw (A) clockwise to
increase idle speed; counter clockwise to decrease idle speed.

Shredder Blade

Level 1.
Never remove vacuum tube or open fan guard when SHRED 'N'
VAC® is running or serious personal injury may result. Always
wear heavy-duty work gloves when working in shredder blade
area.
1. With engine stopped, remove
spark plug wire, remove
vacuum tube from unit.
2. Remove accumulated debris
from blade and inspect for
damage.
Do not operate SHRED 'N' VAC® if shredder blade is damaged or
broken. Return unit to Echo Dealer for service.
3. Install vacuum tube. Refer to "Install Vacuum Tube and Bag Assembly"
in assembly section for correct assembly procedures.
X7501182906
© 9/2018 ECHO Inc.
MAINTENANCE
39