Table of Contents
Advertisement
Quick Links
Hedge Clipper
Operator's Manual
MODEL
Read rules for safe operation and all instructions carefully. ECHO provides this
Operator's Manual and a Safety Manual. Both must be read and understood for
proper and safe operation.
X7532240901
HC-150
Serial Number 05001001 - 05999999
WARNING
DANGER
X753000701
10/03
Advertisement
Table of Contents
Related Manuals for Echo HC-150 - SERIAL NUMBER 05001001-05999999
Summary of Contents for Echo HC-150 - SERIAL NUMBER 05001001-05999999
-
Page 1: Hedge Clipper
MODEL HC-150 Serial Number 05001001 - 05999999 WARNING DANGER Read rules for safe operation and all instructions carefully. ECHO provides this Operator's Manual and a Safety Manual. Both must be read and understood for proper and safe operation. X753000701 X7532240901... -
Page 2: Table Of Contents
NTRODUCTION Welcome to the ECHO family. This ECHO product was designed and manufactured to provide long life and on-the-job dependability. Read and understand this manual. You will find it easy to use and full of helpful operating tips and SAFETY messages. -
Page 3: Manual Safety Symbols And Important Information
Locate these safety decals on your unit. Make sure the decals are legible and that you understand and follow the instructions on them. If a decal cannot be read, a new one can be ordered from your ECHO dealer. See PARTS ORDERING instructions for specific information. -
Page 4: International Symbols
Gloves also reduce the transmission which may lead to heat stroke. Schedule heavy work for of machine vibration to your hands. early morning or late afternoon hours when temperatures are cooler. Hearing Protection ECHO recommends wearing hearing protection whenever unit is used. -
Page 5: Extended Operation/Extreme Conditions
Use only ECHO approved attachments. Serious injury may result from the use of a non-approved attachment combi- nation. ECHO, INC. will not be responsible for the failure of cutting devices, attachments, or accessories which have not been tested and approved by ECHO. Read and comply with all safety instructions listed in this manual and safety manual. -
Page 6: Safe Operation
SAFE OPERATION WARNING DANGER Do not operate this product indoors or in inadequately ventilated areas. Engine exhaust contains poisonous emissions and can cause serious injury or death. Read the Manuals • Provide all users of this equipment with the Operator’s Manual and Safety Manual for instructions on Safe Operation. -
Page 7: Description
LIPPER PERATOR ANUAL ESCRIPTION After opening the carton, check for damage. Immediately notify your retailer or ECHO Dealer of damaged or missing parts. Use the contents list to check for missing parts. CONTENTS __ 1 - Hedge Clipper Assembly __ 1 - Operator’s Manual... - Page 8 17. SAFETY VIDEO - (Not included with unit) P/N 99922202800 English version and P/N 99922203513 Spanish version are available at a cost of $5.00 from ECHO, INC. or any authorized ECHO dealer. The video overviews safety precau- tions and proper operating techniques and is supplemental to the Safety Manual. Read and understand the Safety...
-
Page 9: Specifications
EDGE LIPPER PERATOR ANUAL PECIFICATIONS MODEL ------------------------------------------ HC-150 Length -------------------------------------------- 1,040 mm (41.0 in.) Width --------------------------------------------- 240 mm (9.45 in.) Height -------------------------------------------- 200 mm (7.87 in.) Weight, dry -------------------------------------- 4.8 kg (10.7 lb.) Type of Engine ---------------------------------- Air cooled, two-stroke, single cylinder, gasoline engine Displacement ------------------------------------ 21.2 cc (1.29 cu.in.) Bore ----------------------------------------------- 32.2 mm (1.27 in.) Stroke --------------------------------------------- 26.0 mm (1.02 in.) -
Page 10: Assembly
SSEMBLY NOTE For normal cutting, Echo strongly recommends the blade stiffener be installed. In extreme conditions, such as commercial cutting, or when cutting thick and/or dense branches, efficiency may be increased by trimming without the blade stiffener. Tools required: (2) 10 mm Wrenches... -
Page 11: Pre-Operation
Universal 2-Stroke Oil may be mixed • DO NOT store a unit with fuel in its tank. at 50:1 ratio for application in all Echo engines sold in the past Leaks can occur. Return unused fuel to an regardless of ratio specified in those manuals. -
Page 12: Operation
DANGER The blades should not move at idle. If blades move, readjust carburetor according to “Carburetor Adjustment” instructions in this manual or see your ECHO Dealer, otherwise serious personal injury may result. 6. Throttle Trigger After engine warm-up, grip the handle to depress the throttle trigger lockout, and gradually depress throttle trigger to increase engine RPM to operating speed. -
Page 13: Starting Warm Engine
DANGER The blades should not move at idle. If blades move, readjust carburetor according to “Carburetor Adjustment” instructions in this manual or see your ECHO Dealer, otherwise serious personal injury may result. 1. Stop Switch Move stop switch (A) away from the STOP position. -
Page 14: Hedge Trimming
ECHO Service Dealer for maintenance. To help you decide whether you want to DO-IT-YOURSELF or have the ECHO Dealer do it, each maintenance task has been graded. If task is not listed, see your ECHO Dealer for repairs. -
Page 15: Maintenance Intervals
EDGE LIPPER PERATOR ANUAL MAINTENANCE INTERVALS n i l t I - t l i t l i n i l l f f l i o s t l t n i ® y l l i r u o i t n i f i r u... -
Page 16: Air Filter
AIR FILTER Level 1. Tools required: 25 or 50 mm (1 or 2 in.) cleaning brush Parts required: 90008 REPOWER AIR & FUEL FILTER KIT 1. Close choke (Cold Start Position [ ]). This prevents dirt from entering the carburetor throat when the air filter is removed. Brush accumulated dirt from the air cleaner area. -
Page 17: Spark Plug
EDGE LIPPER PERATOR ANUAL SPARK PLUG Level 2. Tools required: T-wrench, Feeler gauge, Soft metal brush Parts required: REPOWER Tune-Up Kit P/N 90074 1. Remove spark plug and check for fouling, worn and rounded center electrode. 2. Clean the plug or replace with a new one. DO NOT sand blast to clean. -
Page 18: Exhaust System
The cylinder exhaust port must be inspected and cleaned of excess carbon every 3 months or 90 hours of operation in order to maintain this engine within the emissions durability period. ECHO strongly recommends that you return your unit to your ECHO dealer for this important maintenance service. EXHAUST SYSTEM Spark Arrestor Screen Level 2. -
Page 19: Carburetor Adjustment
High Altitude Adjustment High altitude adjustment is not required for proper operation of this engine. Level 2. Tools required: Screwdriver, Tachometer (ECHO P/N 99051130017). Parts required: None. NOTE Every unit is run at the factory and the carburetor is set in compli- ance with emission regulations. -
Page 20: Lubrication
Gear Box Assembly Level 1. Tools required: Grease Gun, Clean rag Parts required: ECHO LUBE 14 oz. (P/N 91015) or Lithium Based ® Grease. 1. Clean dirt from the grease fitting (A). 2. Carefully pump grease into fitting (A). DO NOT force grease. Too much pressure will force grease past seals and cause damage. -
Page 21: Sharpening Blades
If a power grinder is used DO NOT allow blade to over heat. 5. Install blade stiffener (see “Blade Stiffener Install/ Remove instruc- tions”). 6. Lubricate blades (see “Lubrication instructions”). IMPORTANT Blades should only be removed and reinstalled by an Authorized ECHO Servicing Dealer, otherwise premature wear or internal damage may occur. -
Page 22: Troubleshooting
ROUBLESHOOTING r o t r o t i a r i l l r o t r e l i l y i l y r o t r e l f f u r e l h t i r u t r / n r i a... -
Page 23: Storage
EDGE LIPPER PERATOR ANUAL TORAGE WARNING DANGER During operation the muffler or catalytic muffler and surrounding cover become hot. Always keep exhaust area clear of flammable debris during transportation or when storing, otherwise serious personal injury may result. Long Term Storage (over 30 days) Do not store your unit for a prolonged period of time (30 days or longer) without performing protective storage maintenance which includes the following: 1. -
Page 24: Servicing Information
• Purchasing from your Echo Dealer. • Manuals are available by sending a written request stating the model number and serial number of your Echo unit, part number of the manual, your name and address, and mail to the address below.