Shred ' N' Vac® Troubleshooting - Echo ES250 Operator's Manual

OPERATION
SHRED ' N' VAC® Troubleshooting
Problem
Unit runs, but doesn't
vacuum or has poor
suction
Unit stopped
suddenly during
vacuuming, and now
starter won't work
Unit jams repeatedly
during use
Vacuum tube difficult
to install or remove
from unit
30
Cause
Elbow or debris
bag clogged
Obstructions in
vacuum tube
Object stuck in
fan housing
area
Material being
vacuumed too
big or too hard
for blades to
shred
Tube/housing fit
tight.
Remedy
Check elbow and debris bag,
and clear as needed. Make sure
bag is not folded over at intake
during use.
Check vacuum tube, and
remove obstructions. Avoid wet
leaves.
Remove vacuum tube and
check fan area. Remove object.
Use vacuum for leaves and
small twigs, maximum 1/4"
diameter x 3" long
Apply small amount of soapy
water to end of tube to ease
assembly or removal. Turn tube
1/4 turn to loosen for removal.
© 9/2018 ECHO Inc.
ES-250
X7501182906