Troubleshooting - Echo DPPF-2100 Operator's Manual

Power pruner
Table of Contents

Advertisement

DPPF-2100

TROUBLESHOOTING

Trouble
Red Charger LED flashes or
does not light up
Unit will not turn on
Unit does not run when
turned on
Running time is too short
Checking and maintenance requires specialist knowledge. If you are unable
to check and maintain the product or deal with a fault yourself, consult your
dealer. Do not attempt to dismantle the product. Consult your dealer in the
event of a problem that is not covered in the table above, or other such
concerns. For spare parts and consumables, please use only genuine parts
and designated products and components. Using parts from other
manufacturers or non-designated components may result in a malfunction.
X7508310400
© 8/23 ECHO Incorporated
TROUBLESHOOTING
Cause
Plug not connected to
power outlet
Battery not installed
properly
Obstructed connection
Fault in the charger
Fault in the battery
Battery not installed
properly
Battery discharged
Battery outside
acceptable
temperature range
Battery outside
acceptable
temperature range
Unit electronics too hot
Battery discharged
Solution
Plug in the charger
Check the battery
installation
Reinstall battery again
after remove obstructions
from connection
Consult your dealer
Consult your dealer
Check the battery
installation
Charge the battery
Remove the battery and
allow to cool
Remove the battery and
allow to cool
Turn unit off and allow to
cool
Charge the battery
39

Advertisement

Table of Contents
loading

Table of Contents