Changing The Network Connection To Ethernet From The Control Panel; Enabling Energy Efficient Ethernet; Changing The Wi-Fi Direct (Simple Ap) Settings - Epson ET-4700 Series User Manual

User's Guide
Changing the Network Connection to Ethernet from
the Control Panel
Follow the steps below to change the network connection to Ethernet from Wi-Fi using the control panel.
1. Connect the printer to a router using an Ethernet cable.
2. Disable the Wi-Fi from the printer's control panel.
Related Information
"Disabling Wi-Fi from the Control Panel" on page 44
&

Enabling Energy Efficient Ethernet

The Energy Efficient Ethernet for the printer is compliant with IEEE802.3az.
When using this function, enable IEEE802.3az for the printer. All devices connected to the network should support
this function.
1. Access Web Config.
2. Select Advanced Settings from the list at the top right of the window.
3. Select Network Settings > Wired LAN.
4. Select ON for IEEE 802.3az.
5. Click Next.
6. Click OK.
Related Information
"Running Web Config on a Web Browser" on page 156
&

Changing the Wi-Fi Direct (Simple AP) Settings

When a Wi-Fi Direct (Simple AP) connection is enabled, you can change the Wi-Fi Direct settings such as the
network name and the password.
1. Select Wi-Fi Setup on the home screen.
To select an item, use the
2. Select Wi-Fi Direct.
3. Press the OK button to proceed.
4. Press the OK button to proceed.
Network Settings
u d l r
buttons, and then press the OK button.
43