Entering Characters - Epson ET-4700 Series User Manual

User's Guide
A
Icons that show the network status are displayed.
B
l r
When and are displayed, you can scroll right or left by pressing the
C
Function icons and names are displayed as menu icons.
Copy
Scan
Fax
Quiet Mode
Settings
Maintenance
Wi-Fi Setup
D
Available buttons are displayed. In this example, you can proceed to the selected menu by pressing the OK button.

Entering Characters

To enter characters and symbols for network settings and register contacts from the control panel, use the 12-key
numeric keypad. To clear all characters, press the C button.
Printer Basics
The printer is not connected to a wired (Ethernet) network or unset it.
The printer is connected to a wired (Ethernet) network.
Indicates that a wireless (Wi-Fi) network is disabled, or that the printer is processing a wireless
network connection.
Indicates a problem with the printer's wireless (Wi-Fi) network connection, or that the printer is
searching for a wireless (Wi-Fi) network connection.
Indicates that the printer is connected to a wireless (Wi-Fi) network.
The number of bars indicates the signal strength of the connection. The more bars there are,
the stronger the connection.
Indicates that Wi-Fi Direct (Simple AP) is enabled.
Indicates that Wi-Fi Direct (Simple AP) is disabled.
Enters Copy menu that allows you to copy a document.
Enters Scan menu that allows you to scan a document or a photo.
Enters Fax menu that allows you to send faxes.
Displays Quiet Mode setting that allows you to reduce the noise the printer makes. However,
enabling this may reduce print speed. Depending on the paper type and print quality settings
you selected, there may be no difference in the printer's noise level.
This is a shortcut to the following menu.
Settings > Printer Setup > Quiet Mode
Displays Settings menu that allows you to make settings related to maintenance, printer
setup, and network settings.
Displays the menus recommended to improve the quality of your printouts such as un-
clogging nozzles by printing a nozzle check pattern and performing head cleaning, and
improving blurring or banding in your printouts by aligning the print head. This is a shortcut to
the following menu.
Settings > Maintenance
Displays menus that allow you to set up the printer for use on a wireless network. This is a
shortcut to the following menu.
Settings > Network Settings > Wi-Fi Setup
l r
or
18
button.