Making Wi-Fi Settings By Pin Code Setup (Wps); Checking The Network Connection Status - Epson ET-4700 Series User Manual

User's Guide
Related Information
"Checking the Network Connection Status" on page 34
&
"When You Cannot Make Network Settings" on page 180
&

Making Wi-Fi Settings by PIN Code Setup (WPS)

You can automatically connect to an wireless router by using a PIN code. You can use this method to set up if an
wireless router is capable of WPS (Wi-Fi Protected Setup). Use a computer to enter a PIN code into the wireless
router.
1. Select Wi-Fi Setup on the home screen.
To select an item, use the
2. Select Wi-Fi (Recommended).
3. Press the OK button to proceed.
4. Select Others.
5. Select PIN Code (WPS).
6. Use your computer to enter the PIN code (an eight digit number) displayed on the printer's control panel into
the wireless router within two minutes.
Note:
See the documentation provided with your wireless router for details on entering a PIN code.
7. Press the OK button on the printer.
Setup is complete when the setup completion message is displayed.
Note:
If connection fails, restart the wireless router, move it closer to the printer, and try again. If it still does not work, print a
connection report and check the solution.
Related Information
"Checking the Network Connection Status" on page 34
&
"When You Cannot Make Network Settings" on page 180
&

Checking the Network Connection Status

You can check the network connection status in the following way.
Network Settings
u d l r
buttons, and then press the OK button.
34