Siemens SINUMERIK 840D sl Operating Manual page 46

Messages
8.3 Warnings
Warnings
Description
DRIVEOBJECT_COMPONENT_ALREADY_ASSIGNED
The drive object (DO) has already been assigned to another
device.
DRIVEOBJECT_COMPONENT_NOT_IN_GLOBALDO_LIST
The assigned drive object is not contained in the global DO
list.
DRIVEOBJECT_ERROR_WHILE_READING
An error occurred while reading the drive object assignments. The export will be continued without the relevant assignmens.
DRIVEOBJECT_FILE_HAS_DUPLICATE_IDS
Duplicates of DO names have been found in the global DO
list.
The IDs in the global DO list are the DO names.
UNKNOWN_ECAD_VERSION
Bus data has not been implemented for the used EPLAN ver‐
sion.
UNSUPPORTED_PROPERTY_TYPE
The EPLAN property for bus data has found an unsupported
type.
This warning can occur with unsupported EPLAN versions or
when unsupported values have been entered.
46
Remedy
Make a unique assignment of the drive object (DO).
Update the global DO list and adapt the assignment.
Contact the Support.
Remove the duplicates from the global DO list.
Use a different EPLAN version or contact the Support.
Check the bus data or contact the Support.
SINUMERIK Integrate Create MyConfig - EPLAN Electric P8 Add-In
Operating Manual, 12/2017, A5E43099659B-AA