Filtering Of Eplan Devices And Drive Objects - Siemens SINUMERIK 840D sl Operating Manual

Entries in the EPLAN property fields
Note the following rules for entries in the EPLAN property fields:
● The DO variable is included in the DO list.
● The ">" separator must be used for the separation of the DO name and the DO component.
● Note the following XML rules when assigning DO variables:
● If the DO name includes the ">" separator, enter it as previously defined in the table.
DO assignment using the MOTOR example with precisely one DO assignment:
"DMM_2>Mot_02"
Display: DO + motor
DO assignment using the MOTOR_WITH_ENCODER example with two DO assignments:
"DMM_1>Mot_03>DMM_1>Enc_01"
Display: DO + motor + DO + encoder
5.4.4

Filtering of EPLAN devices and drive objects

Filtering of EPLAN devices
To filter according to EPLAN devices, you have the following options:
● Filtering according to unassigned devices
● Filtering based on the entered device designation
Figure 5-16
SINUMERIK Integrate Create MyConfig - EPLAN Electric P8 Add-In
Operating Manual, 12/2017, A5E43099659B-AA
Character
<
>
&
"
'
Filtering devices
Configuring with EPLAN Add-In
5.4 Assigning drive objects
XML
&lt;
&gt;
&amp;
&quot;
&apos;
31