Siemens SINUMERIK 840D sl Operating Manual page 39

● S1
● T1
Note
Item designation that EPLAN does not recognize
There is no search for the following item designations:
● Item designation X24, +, M (Single Motor Module)
● X124, i.e. not a power supply connection for SINAMICS CPU in the export file "example.sdx"
Entering the "DeviceName" tag
When using a PLC unit as device representation, enter the tag "DeviceName" in the field "CPU:
Name [1]" under the tab "PLC structure data".
Figure 6-1 "PLC structure data" tab, entry for "CPU: Name [1]"
When using an ancillary equipment unit for device representation, enter the tag "DeviceName"
in the field "Function text" under the "Ancillary equipment unit" tab.
SINUMERIK Integrate Create MyConfig - EPLAN Electric P8 Add-In
Operating Manual, 12/2017, A5E43099659B-AA
6.3 Minimum requirements in EPLAN regarding power topology
EPLAN adaptations
39