Related Manuals for BEA Fly
Summary of Contents for BEA Fly
- Page 1 FLY AND FLY ERT Request - to - Exit Sensor (US version) DESCRIPTION 1. Lens (mask inside) 2. Housing (sensor inside) ACCESSORIES FLY CEILING ADAPTER (FCA) FLY SURFACE ADAPTER (FSA) 75.0152.04 FLY 20180523 75.0152.04 FLY 20180523 Page 1 of 4...
- Page 2 ‰ DO NOT attempt any internal repair of the components. All repairs and/or component replacements must be performed by BEA, Inc. Unauthorized disassembly or repair: 1. May jeopardize personal safety and may expose one to the risk of electrical shock.
- Page 3 ON: 2 sec Hold Time (FLY) OFF: 0.5 sec ON: 30 sec Hold Time (FLY ERT) OFF: 15 sec * Factory Settings are in bold. ** Passive output: relay contact open during detection, closed during non-detection *** Active output: relay contact closed during detection, open during non-detection NOTES: 1.
-
Page 4: Troubleshooting
All values measured in specific conditions. BEA INSTALLATION/SERVICE COMPLIANCE EXPECTATIONS BEA Inc., the sensor manufacturer, cannot be held responsible for incorrect installations or inappropriate adjustments or the sensor/device; therefore, BEA Inc. does not guarantee any use of the sensor outside its intended purpose.