Advertisement
Quick Links
Visit website for
available languages of
this document.
DESCRIPTION
FOCUS 2 (recessed mount)
TECHNICAL SPECIFICATIONS
Technology
Detection mode
Detection field
Response time
Supply voltage
Max. current consumption
Standard output:
max. contact rating
Distance adjustment
LED indications:
Temperature range
PCB dimensions
Cable
75.0074.06 FOCUS FOCUS2 20191002
active infrared
infinite presence detection by distance measurement (N.O. or N.C.)
0 – 8' 2"
< 50 ms
24 VAC/VDC +10%
on = 60 mA; off = 30 mA
relay
1A @ 30 V (resistive)
2 – 8' (rotating cam with linear adjustment)
green = detection
-30 – 140 °F
6 ¾" (L) x 1 ½" (H)
5-conductor
Specifications are subject to change without prior notice.
All values measured in specific conditions.
FOCUS and FOCUS 2
Presence sensors for revolving doors, drive-up
windows, and sidelite protection
FOCUS (surface mount)
Page 1 of 4
Advertisement
Related Manuals for BEA FOCUS
Summary of Contents for BEA FOCUS
- Page 1 FOCUS and FOCUS 2 Presence sensors for revolving doors, drive-up Visit website for available languages of windows, and sidelite protection this document. DESCRIPTION FOCUS (surface mount) FOCUS 2 (recessed mount) TECHNICAL SPECIFICATIONS Technology active infrared Detection mode infinite presence detection by distance measurement (N.O. or N.C.) Detection field 0 –...
- Page 2 ‰ DO NOT attempt any internal repair of the components. All repairs and/or component replacements must be performed by BEA, Inc. Unauthorized disassembly or repair: 1. May jeopardize personal safety and may expose one to the risk of electrical shock.
- Page 3 See diagram below for distance adjustment potentiometer location. Note: Access the potentiometer on the FOCUS 2 by removing the hole plug on the front face. a. Inactive zone too high: Turn the distance potentiometer •••••...
- Page 4 BEA, Inc. does not guarantee any use of the sensor outside of its intended purpose. BEA, Inc. strongly recommends that installation and service technicians be AAADM-certifi ed for pedestrian doors, IDA-certifi ed for doors/gates, and factory-trained for the type of door/gate system.