Advertisement
PRECAUTIONS
‰ Shut off all power going to header before attempting any wiring procedures.
‰ Maintain a clean and safe environment when working in public areas.
‰ Constantly be aware of pedestrian traffic around the door area.
‰ Always stop pedestrian traffic through the doorway when performing tests that may result in
unexpected reactions by the door.
‰ Always check placement of all wiring before powering up to ensure that moving door parts will not
catch any wires and cause damage to equipment.
‰ Ensure compliance with all applicable safety standards (i.e. ANSI A156.10) upon completion of
installation.
‰ DO NOT attempt any internal repair of the components. All repairs and/or component replacements
must be performed by BEA, Inc. Unauthorized disassembly or repair:
The door control system
and the header cover
profile must be correctly
grounded.
PREPARING THE SENSOR
1
Insert a small screwdriver on
the side of the housing and
gently pry off cover.
3
NOTES:
1. It is not necessary to use the mask. Installing the lens without the mask will allow maximum detection size. If using the
mask, it is necessary to cut at least one segment to allow detection.
Page 2 of 4
Page 2 of 4
1. May jeopardize personal safety and may expose one to the risk of electrical shock.
2. May adversely affect the safe and reliable performance of the product resulting in a voided
warranty.
Only trained and qualified
personnel are recommended
to install and set up the
sensor.
If the mask needs to be
removed, pry up with a
screwdriver on the small legs
of the lens.
Adjust sensing field by removing
segments of the mask with a diagonal
cutter (or similar).
right for detection patterns.
Always
proper operation of
the installation before
leaving the premises.
2
See diagrams to the
1
test
the
The warranty is invalid if
unauthorized repairs are
made or attempted by
unauthorized personnel.
*remove gray portions to
achieve desired field*
FULL
DETECTION
PATTERN
[no mask]
ASYMMETRIC
DETECTION
PATTERN
SHORTER DEPTH
DETECTION
PATTERN
75.0152.04 FLY 20180523
75.0152.04 FLY 20180523
Advertisement
