Serial/LocalTalk Card or Network Card
The Serial/LocalTalk option lets you connect your ML-6100 to a PC or
Macintosh serial interface, or to a Macintosh LocalTalk network.
To use the serial connection, a standard 9-pin serial cable is
required. One end has a 9-pin female connector and the other end
has a 9-pin male connector. Do not use a null-modem cable,
which is a twisted pair cable.
To use the Network I/F card, a standard RJ45 cable is required.
Review the precautions on page 6.1 and then follow this procedure
to install the Serial/LocalTalk or Network card option in your printer.
1. Turn the printer power off and disconnect the power cord and printer
cable.
2. Remove the control board cover.
6.
Printer Options
8