Port Thru (Network Printer Card) - Samsung ML-7000 Series Service Manual

10. PortThru (Network Printer Card) Circuit Description
10-1. Introduction
The purpose of the Network Printer Card(PortThru) is to enable the Samsung Printer to function as a network printer.
The PortThru is a plug-in card that plugs into the Samsung Printer. The PortThru provides a Ethernet Local Area
Network interface through which the printer can be connected to the network.
ITEM
Novell Netware
MS Windows
Support system
UNIX
Macintosh
Netware
Windows
Support protocols UNIX
APPLE
Network Management SNMP MIB-II, Private MIB
CPU
Hardware Flash memory
RAM
Interface with
Shared memory
Printer
Logical connection
Attachment
CPU
PHY Chip
Flash ROM
DRAM
Memory
SRAM
EEPROM
Printer Interface
Dimension(HxWxD)
Power Consumption
Samsung Electronics
Version 3.x, 4.x, 5.0
Windows 95/98, Windows NT(3.x, 4..x)
AT & T System V(Rel 3.2, Rel 4.2), BSD 4.3 HP-UX(Rel 9.x, Rel 10.x)
SCO 5.x, SUN OS 5.5, SOLARIS 2.5
APPLE
IPX/SPX, Pserver, Rprint mode, NDS/Bindery
IPX/SPX, TCP/IP, DLC/LLC
TCP/IP
EtherTalk Phase 2
32bit RISC controller
1M byte
64 Kbyte SRAM / 8M byte DRAM
64K byte SRAM
IEEE 802.2 802.3
10/100Base-Tx
Samsung NetARM, 33MHz
ICS1892, 25MHz
1M Byte
8M Byte
64K Byte
32K Bit
NetBridge, 33MHz
60 Pin Connector
15 x 80 x 124mm
Max. 0.6A/ +5Vdc
Product Information
Description
10-1