Table of Contents
Advertisement
Printer Driver Installation
Use the following instructions to install the PCL6 and/or PCL5e printer
drivers on a Windows-based PC. The printer driver enables you to
control the ML-6100's features and capabilities (see the table on the next
page). Use the driver's on-line help for a complete description of its
functionality. If necessary, consult your Windows documentation for
instructions on accessing the driver.
For other software installation procedures, including printer utilities, see
the section "Software Utilities Installation" (page 2.13).
Before installing the software, verify the following:
• Your PC has at least 16 MB of RAM installed.
• There is at least 20 MB of free disk space on your PC.
• ALL APPLICATIONS ARE CLOSED ON YOUR PC BEFORE
BEGINNING INSTALLATION. (A system reboot may be required after
the software is installed.)
Windows 95/98/NT 4.0
1. Insert the ML-6100 CD-ROM into your CD-ROM drive. If Windows
automatically runs the CD-ROM, skip to Step 4.
2. Select Run from the Start menu.
3. Type d:\setup.exe on the command line (where "d" is your CD-ROM
drive letter), then click OK.
4. Select the appropriate language.
5. Select Printer Driver and follow the on-screen instructions to
complete the installation.
For Windows 95/98, please reboot once you have completed installation.
Note: The manufacturer recommends the minimal installation of the PCL6
driver, which contains all the features described in the product description.
Advanced features include Manual Duplex, Multiple Images,
Watermarks, and Booklet Printing.
Windows 3.1x
1. Turn on the printer, then turn on the computer and start Windows.
2. Insert the ML-6100 CD-ROM into your CD-ROM drive.
3. Open the Program Manager and select Run from the File menu.
Printer Setup
2.
11
Advertisement
Table of Contents
