Using The Unified Driver Configurator; Opening The Unified Driver Configurator; Printers Configuration; Printers Tab - Samsung ML ML-2240 User Manual

Using the Unified Driver
Configurator
Unified Linux Driver Configurator is a tool primarily intended for
configuring Printer.
After installing the Unified Linux driver, the Unified Linux Driver
Configurator icon will automatically be created on your desktop.
Opening the Unified Driver
Configurator
1
Double-click Unified Driver Configurator on the
desktop.
You can also click the Startup Menu icon and select
Samsung Unified Driver and then Unified Driver
Configurator.
2
Press each button on the Modules pane to switch to the
corresponding configuration window.
Printers Configuration button
Ports Configuration button
You can use the onscreen help by clicking Help.
3
After changing the configurations, click Exit to close the
Unified Driver Configurator.

Printers Configuration

Printers configuration has the two tabs: Printers and Classes.

Printers Tab

You can see the current system's printer configuration by
clicking on the printer icon button on the left side of the Unified
Driver Configurator window.
You can use the following printer control buttons:
• Refresh: renews the available printers list.
• Add Printer: allows you to add a new printer.
• Remove Printer: removes the selected printer.
• Set as Default: sets the current printer as a default
• Stop/Start: stops/starts the printer.
• Test: allows you to print a test page to check if the
• Properties: allows you to view and change the printer
23
Using Your Printer in Linux
Switches to Printer
configuration.
Shows all of the
installed printer.
Shows the status,
model name and
URI of your printer.
printer.
machine is working properly.
properties. For details, see page 24.