Guidelines For Using Paper - Samsung CLP-510 Series Setup Manual

E.6
S
PECIFICATIONS

Guidelines for Using Paper

For the best result, use conventional 75g/m
Ensure that the paper is of good quality, and free of cuts, nicks,
tears, spots, loose particles, dust, wrinkles, voids, and curled or
bent edges.
If you are unsure of what type of paper you are loading, such as
bond or recycled paper, check the label on the package.
The following problems may cause print quality deviations,
jamming or even damage to the printer.
Symptom
Poor print quality
or toner adhesion,
problems with
feeding
Dropout,
jamming, curl
Increased gray
background
shading/printer
wear
Excessive curl
problems with
feeding
Jamming, damage
to printer
Problems with
feeding
N
:
OTES
• Do not use letterhead paper printed with low-temperature inks,
such as those used in some types of thermography.
• Do not use raised or embossed letterhead.
• The printer uses heat and pressure to fuse toner to the paper.
Ensure that any colored paper or preprinted forms use inks that
are compatible with this fusing temperature (180°C or 356°F for
0.1 second).
Problem with
Paper
Too moist, too
rough, too smooth
or embossed;
faulty paper lot
Stored improperly
Too heavy
Too moist, wrong
grain direction or
short-grain
construction
Cutouts or
perforations
Ragged edges
(20lb) paper.
2
Solution
Try another kind of
paper, between 100 ~
250 Sheffield, 4 ~ 5%
moisture content.
Store paper flat in its
moisture-proof
wrapping.
Use lighter paper, open
the rear output tray.
Use long-grain paper.
Do not use paper with
cutouts or perforations.
Use good quality paper.