Installing Printer Software In Windows - Samsung CLP-510 Series Setup Manual

22
S G
ETUP UIDE

Installing Printer Software in Windows

Verify the following before you install the printer software:
Item
Operating system
RAM
Free disk space
Internet Explorer
N
:
OTES
• For Windows NT 4.0/2000/XP/2003, the system administrator
should install the software.
• Windows 95 and Windows NT 4.0 are only supported on the CLP-510N.
C
: For the CLP-510N, to print a document in Windows 95
AUTION
or Windows NT 4.0, you must install SyncThru and then add a
network printer port. For details about installing SyncThru and
adding a port, please refer to Network Management Software
Quick Guide and SyncThru User's Guide.
All applications should be closed on your PC before beginning
installation.
1
Place the CD-ROM in the CD-ROM drive. Installation will
start automatically.
If the CD-ROM drive does not automatically run:
Select Run from the Start menu, and type x:\setup.exe
in the Open box (where x is the drive letter for the CD-ROM
drive), then click OK.
N
: If the New Hardware Found window appears during the
OTE
installation procedure, click
to close the window, or click Cancel.
Requirements
Windows 95/98/Me/NT 4.0/2000/XP/
2003
95/98/Me
NT 4.0/2000
XP
2003
95/98/Me/NT 4.0/
2000/XP/2003
5.0 or higher
in the upper right corner of the box
32 MB
64 MB
128 MB
256 MB
300 MB