Clearing Paper Jams - Samsung CLP-510 Series Setup Manual

Problem
The printing The resolution is set to
quality of 600 dpi [Normal].
photos is not
The resolution of the
clear.
photo is very low.
Your printer has The oil used to protect
a odd smell the fuser is
during the evaporating.
initial use.
7.6
S P
OLVING ROBLEMS
Possible Cause

Clearing Paper Jams

N
: When removing paper that is jammed in the printer, if
OTE
possible always pull the paper in the direction that it normally
moves so as not to damage internal components. Always pull
firmly and evenly; do not jerk the paper. If the paper tears, ensure
that all fragments of paper are removed; otherwise a jam will
occur again.
The display on the control panel tells you where a paper jam has
occurred. Refer to the table below to locate the paper jam and
to clear it:
Message
Jam0 In Tray1
Jam0 In MP Tray
Jam
Inside Printer
Jam
In Exit Area
Jam
In Duplex Path
Jam0 In Tray2
To resume printing after clearing paper jams, you must open
and close the right cover.
Solution
Change the resolution to 1200 dpi [Best]
and then try to print again.
If you increase the photo size in the
software application, the resolution will be
reduced. Reduce the photo size and then
improve the resolution.
After printing about 100 color pages, there
will be no more smell. It is a temporary
problem.
Location of Jam
In the paper feed area
In the multi-purpose tray
Inside printer
In the paper exit area
In the duplex area
In the optional tray 2
GoTo
page 7.7
page 7.9
page 7.9
page 7.10
page 7.13
page 7.17