Solving General Printing Problems - Samsung CLP-510 Series Setup Manual

Solving General Printing Problems

For problems with the operation of your printer, refer to the table
for suggested solutions.
Problem Possible Cause
The printer The printer is not
does not print. receiving power.
The printer is not
selected as the default
printer.
Check the printer for
the following:
• The printer cover is
not closed.
• Paper is jammed.
• No paper is loaded.
• The toner cartridge is
not installed.
The printer may be in
manual feed mode and
out of paper.
The connection cable
between the computer
and the printer is not
connected properly.
The connection cable
between the computer
and the printer is
defective.
The printer may be
configured incorrectly.
The printer driver may
be incorrectly installed.
The printer is
malfunctioning.
Printer selects The paper source
print materials selection in the printer
from the wrong properties may be
paper source. incorrect.
Solution
Check the power cord connections. Check
the power switch and the power source.
Select Samsung CLP-510 Series as your
default printer.
See to the appropriate issue.
Check the display message, add paper to
the Multi-purpose Tray, and press the
On Line/Continue button on the printer's
control panel.
Disconnect the printer cable and reconnect
it.
If possible, attach the cable to another
computer that is working properly and try
to print a document. You can also try using
a different printer cable.
Check the printer properties to ensure that
all of the print settings are correct.
Reinstall the printer driver; refer to the
Setup Guide supplied with your printer. Try
printing a demo page.
Check the display message on the control
panel to determine if the printer is
indicating a system error.
For many software applications, the paper
source selection is found under the
tab within the printer properties. Select the
correct paper source. See page 4.7.
S
OLVING
Paper
7.3
P
ROBLEMS
7