Philips HP4698 Manual page 7

For additional protection, we advise you to install a residual
current device (RCD) with a rated residual operating current not
exceeding 30mA in the electrical circuit supplying the bathroom.
Ask your installer for advice.
Do not connect the handle to the mains without attaching an
attachment first. Make sure the attachment is properly fixed to
the handle before you put the plug in the wall socket.
Keep the attachments clean and free of dust, dirt, styling spray
and gel. Never use the appliance in combination with styling
mousse, styling spray, gel etc.
The attachments have a ceramic coating.This coating will wear in
the course of time.When this happens, the appliance will still
function normally.
The ceramic-coated parts of the attachments will become hot
during use. Prevent contact with the skin. Do not allow the mains
cord to touch any hot parts.
Always return the appliance to a service centre authorised by
Philips for examination or repair. Repair by unqualified people
could cause an extremely hazardous situation for the user.
Keep the appliance out of the reach of children.
Only use the appliance on dry or damp hair.
Always unplug the appliance after use.
Wait until the appliance has cooled down before storing it.
Do not wind the mains cord round the appliance.
Preparing for use
Before you start styling, comb or brush the hair so that it is
untangled and smooth.
Connecting the attachments
1 Insert one of the attachments into the handle. Make sure that the
stand is pointing downwards (fig. 1).
2 Turn the locking ring on the handle to the rigth until the bold
arrow on the locking ring is in line with the arrow on the handle.
The attachment is now securely fixed to the handle (fig. 2).
ENGLISH
7