Page 1
Hair Styler Register your product and get support at www.philips.com/welcome HP4696/37 User manual...
Page 3
English Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome. Important Read this user manual carefully before you use the appliance and keep it for future reference.
If you use the appliance on colour-treated hair, the straightening plates/curling tongs may stain. • If the mains cord is damaged, you must have it replaced by Philips, a service centre authorised by Philips or similarly qualified persons in order to avoid a hazard.
Page 5
Note: Do not change the attachments or styler when the appliance is heating up or when it is hot. Let the appliance heat up for 5-15 minutes for a perfect straightening result. Do not pull at the curler when you unwind the section, otherwise you would straighten the curl.
Page 6
2 Slide a suitable styler or crimping/straightening plates onto the attachment. • To remove the crimping/straightening plate, grab the cool tip ( and pull it off. 3 Place the appliance with the support ( ) outwards on a heat-resistant surface. 4 Connect the plug to a mains socket.
Page 7
Create crimps 1 Press the lever ( ) to open the attachment and place a section of hair between the crimping plates. Start crimping at the roots. 2 Release the lever and keep the plates together for 5 to 10 seconds. 3 Press the lever to open the attachment and place a lower area of the same section of hair between the plates.
If you need information e.g. about replacement of an attachment or if you have a problem, please visit the Philips website at www.philips.com or contact the Philips Customer Care Centre in your country (you find its phone number in the worldwide guarantee leaflet). If there is no...