I-Stop Warning Beep; Power Liftgate Warning Beep; Autohold Warning Beep; Power Steering Warning Buzzer - Mazda CX-8 Manual

Hide thumbs Also See for CX-8:
Table of Contents

Advertisement

If Trouble Arises
Warning/Indicator Lights and Warning Sounds

▼ i-stop Warning Beep

If the driver's door is opened while
engine idling is stopped, the warning
sound operates to notify the driver that
engine idling is stopped. It stops when
the driver's door is closed.

▼ Power Liftgate Warning Beep

If system operation precautions are
necessary, the driver is notified by the
warning sound.
Cautions
The conditions required
for the power liftgate to
operate have not been
The beep sounds 3 times
met, such as an object
being stuck in the lift-
gate.
The vehicle is being
The beep sound contin-
driven with the liftgate
ues
open. Stop the vehicle
and close the liftgate.

▼ Power Steering Warning Buzzer

If the power steering system has a
malfunction, the power steering
malfunction indication is displayed and
the buzzer operates at the same time.
Refer to Stop Vehicle in Safe Place
Immediately on page 7-22.
▼ Electric Parking Brake (EPB)
Warning Beep
The warning buzzer is activated under the
following conditions:
The vehicle is driven with the parking
brake applied.
The Electric Parking Brake (EPB)
switch is pulled while the vehicle is
driven.
7-40
*Some models.
CX-8_8GF4-EO-18D_Edition1
*
What to check

▼ AUTOHOLD Warning Beep

Warning light flashes/message is displayed
and beep sound is activated
simultaneously for about 5 seconds when
using AUTOHOLD function or when
AUTOHOLD switch is operated.
Because a problem with AUTOHOLD
function has occurred, AUTOHOLD
function does not operate even if
AUTOHOLD switch is operated.
If the warning light flashes/message is
displayed and the beep sound is activated
simultaneously, have your vehicle
inspected at an expert repairer, we
recommend an Authorised Mazda
Repairer.
▼ Vehicle Speed Alarm
The vehicle speed alarm function is
designed to alarm the driver via a single
beep sound and a warning indication in the
instrument cluster that the previously set
vehicle speed has been exceeded.
You can change the vehicle speed setting
at which the warning is triggered.
2018-3-6 19:38:07

Advertisement

Table of Contents
loading

Table of Contents