When Driving
Instrument Cluster and Display
▼ Glow Indicator Light
When the ignition is switched ON, the
glow indicator light turns on. The glow
indicator light turns off when preheating is
finished.
A problem in the system might be
indicated under the following conditions.
Have your vehicle inspected by an expert
repairer, we recommend an Authorised
Mazda Repairer.
The glow indicator light does not turn
•
on when the ignition is switched ON or
it remains on.
The glow indicator light is flashing.
•
NOTE
If the vehicle is left with the ignition
switched ON without starting the engine
and a long period of time has elapsed
since preheating finished, the preheating
may be performed again and the glow
indicator light may turn on.
4-40
CX-8_8GF4-EO-18D_Edition1
▼ Wrench Indication
The wrench indication is displayed under
the following conditions.
When the preset maintenance period has
•
arrived.
Refer to Maintenance Monitor on page
6-8.
When the engine oil has deteriorated.
•
When fuel filter (sedimentor) draining is
•
required. Consult an expert repairer, we
recommend an Authorised Mazda
Repairer.
NOTE
The wrench indication may display
•
earlier than the preset period depending
on vehicle usage conditions.
Whenever the engine oil is replaced, a
•
reset of the vehicle engine control unit
necessary.
Your Authorised Mazda Repairer will be
able to reset the engine control unit or
see page 6-15 for the Vehicle engine
control unit reset procedure.
▼ Low Engine Coolant Temperature
Indicator Light (Blue)
The light illuminates continuously when
the engine coolant temperature is low and
turns off after the engine is warm.
2018-3-6 19:38:07