Operation Using Each Switch; Operation Conditions; Operation From The Driver's Seat - Mazda CX-8 Manual

Before Driving
Doors and Locks
NOTE
When the ignition is switched ON, the
•
transmitter does not operate.
When opening the liftgate by pressing
•
the power liftgate button on the
transmitter, the liftgate can be opened
even when it is locked.
If the power liftgate button on the
•
transmitter is pressed while the liftgate
is opening/closing electrically, the beep
is activated and the liftgate stops. When
pressing the power liftgate button again,
the liftgate moves in the reverse
direction.

Operation using each switch

Operation conditions

Opening the liftgate
If the vehicle has satisfied all the
following operation conditions, the power
liftgate can be opened using the power
function.
All doors and the liftgate are unlocked.
•
The ignition is switched OFF, or the
•
selector lever is in P with the ignition
switched ON.
Closing the liftgate
The ignition is switched OFF, or the
•
selector lever is in P with the ignition
switched ON.
3-18
CX-8_8GF4-EO-18D_Edition1
NOTE
If the vehicle moves with the selector
•
lever shifted to a position other than P
while the liftgate is opening/closing
electrically, the liftgate moves as
follows:
While opening electrically
The buzzer is activated, and the liftgate
moves in the reverse direction
automatically and closes. When the
selector lever is shifted to P, you can
resume the power liftgate operation
using the switches.
While closing electrically
The buzzer is activated, but the liftgate
continues closing.
Operation from the driver's seat (To
open/close)
Press the power liftgate switch for about
one second or more while the liftgate is in
the fully closed/open position. The hazard
warning lights flash twice and the liftgate
opens/closes fully after the beep sound is
heard.
Power liftgate
switch
2018-3-6 19:38:07