Warning Pattern; Warning Activation Timing - Mazda CX-8 Manual

Hide thumbs Also See for CX-8:
Table of Contents

Advertisement

Warning pattern

Off: The excessive speed warning is not activated.
Visual: The area around the speed limit sign displayed in the display flashes 10 times in
amber, and if the vehicle speed continues to exceed the displayed speed limit sign, the
indication stops flashing and remains on.
Audio & Visual: The area around the speed limit sign displayed in the display flashes 10
times in amber and the warning sound is activated 3 times at the same time. If the vehicle
speed continues to exceed the displayed speed limit sign, the indication stops flashing and
remains on.

Warning activation timing

0: If the vehicle speed exceeds the speed limit sign displayed in the display, the
excessive speed warning is activated.
5: If the vehicle speed exceeds the speed limit sign displayed in the display by 5 km/h
(3 mph), the excessive speed warning is activated.
10: If the vehicle speed exceeds the speed limit sign displayed in the display by 10
km/h (5 mph), the excessive speed warning is activated.
NOTE
In the following cases, the excessive speed warning stops operating.
The vehicle speed is less than the speed of the displayed speed limit sign. (If the
activation timing for the excessive speed warning is changed in the personalisation
features, the excessive speed warning stops operating when the vehicle speed is less
than the changed vehicle speed.
A speed limit sign indication has been updated and the vehicle speed is lower than the
updated indication.
Display of the speed limit sign stops.
The warning indication is displayed at the same time the excessive speed warning sound
is activated if the vehicle speed exceeds the speed indicated on the speed limit sign.
Refer to Warning Sound is Activated on page 7-37.
The TSR can recognise a speed limit sign with an auxiliary sign and display it, but it
cannot determine the indication on the auxiliary sign (such as time restrictions, turning
restrictions, end of section). Therefore, the excessive speed warning is activated when the
vehicle speed exceeds the displayed speed limit sign even if the conditions indicated on
the auxiliary sign do not apply to the vehicle.
If the Forward Sensing Camera (FSC) incorrectly recognises the actual speed limit sign
at a lower speed, the excessive speed alarm is activated even if the vehicle is driven at the
legal speed.
CX-8_8GF4-EO-18D_Edition1
When Driving
i-ACTIVSENSE
4-103
2018-3-6 19:38:07

Advertisement

Table of Contents
loading

Table of Contents