Front Direction Indicator Lights; Replacing Exterior Light Bulbs; Rear Direction Indicator Lights - Mazda CX-8 Manual

Rear direction indicator lights

Reverse light
High-mount brake light
Number plate lights
Front overhead lights/Front map lights
Vanity mirror lights
Centre map lights
Rear overhead light
Luggage compartment light
CAUTION
When removing the lens or lamp unit using
a flathead screwdriver, make sure that the
flathead screwdriver does not contact the
interior terminal. If the flathead screwdriver
contacts the terminal, a short circuit may
occur.
NOTE
To replace the bulb, contact an expert
•
repairer, we recommend an Authorised
Mazda Repairer.
Use the protective cover and carton for
•
the replacement bulb to dispose of the
old bulb promptly and out of the reach
of children.

▼ Replacing Exterior Light Bulbs

Headlights, Running lights
*
lights, Fog lights , Brake lights, Tail
lights, High-mount brake light, Side
direction indicator lights
The LED bulb cannot be replaced as a
single unit because it is an integrated unit.
The LED bulb has to be replaced with the
unit. We recommend an Authorised Mazda
Repairer when the replacement is
necessary.
CX-8_8GF4-EO-18D_Edition1

Front direction indicator lights

1. Make sure the ignition is switched off,
2. Lift the bonnet.
3. Turn the socket and bulb assembly
4. Disconnect the bulb from the socket.
5. Install the new bulb in the reverse
*
, Position
Rear direction indicator lights
1. Make sure the ignition is switched off,
Maintenance and Care
Owner Maintenance
and the headlight switch is off.
Refer to Bonnet on page 6-11.
anticlockwise and remove it.
order of the removal procedure.
and the direction indicator switch is
off.
*Some models.
6-35
2018-3-6 19:38:07