Creating A Playlist Entry - Samsung DVD-VR300 Instruction Manual

Press the ENTER button at the end point.
7
The image and time at the end point are
8
displayed the end point window.
❷
9 Press the buttons to select Delete, and then
press the ENTER button.
• Message "Do you want to delete?" will be dis-
played.
• If you want to cancel, press RETURN button to
return to the Title List screen.
Press the MENU button to exit the menu after the
10
operation is finished.
The Title List screen will disappear.
The length of the selection to delete should be at
least 5 seconds long.
Note
If the length of the section to delete is less than 5
seconds, you will be prompted with the message
"The range is too short".
If the end time precedes the start time, you will be
prompted with the message "End point cannot be
marked earlier than start point".
78 - English

Creating a Playlist Entry

Follow these directions to create a new playlist entry from a
recorded title.
Press the MENU button when the disc is stopped.
1
❷
2 Press the button to select Playlist, and then
❿
press the ENTER or
❷
Press the button to select New Playlist, and
3
then press the ENTER or
• The Make Scene screen is displayed.
Play List : The Playlist is a unit of playback, that is
created by selecting a desired scene in
Note
the Title List. Since only the information
necessary for playing a desired scene is
included in a playlist, even if that
playlist is deleted, the original data will
not be deleted.
DVD-RAM DVD-RW
VR mode
button.
❿
button.