Auto Channel Memory - Samsung DVD-VR300 Instruction Manual

About the Change Password;
1
Select Change Password using
❿
press the or ENTER button.
• The 'Enter the password.' message will be
displayed.
Enter the 4-digit password using the 0 to 9 buttons
2
on the remote.
• The 'Confirm the password.' message will be dis-
played.
Enter your password again using the 0 to 9 buttons
3
on the remote.
Press the RETURN or
previous menu. Press the MENU button to exit the
Note
menu.

Auto Channel Memory

Auto Channel Memory will automatically seek and store all
active channels in your area.
Open "MENU"
1
With the DVD in stop mode, press the MENU but-
ton.
Select "SETUP"
2
❷
Using the buttons, move the selection bar to
"Setup" then press ENTER to select.
❷
buttons, then
➛
button to return to the
Select "Channel Set"
3
❷
Using the buttons, move the selection bar to
"Channel Set", then press ENTER to select.
Run "Auto channel memory"
4
Move the selection arrow to "Auto Channel
Memory," then press ENTER to select.
• The DVD Recorder-VCR will automatically
search for all available channels in the selected
Tuner Band. This procedure may take a few
minutes to complete.
• When finished, the lowest channel found will
be displayed.
•Press ENTER button to STOP or cancel scan-
ning.
English - 31