Auto Clock Set - Samsung DVD-VR300 Instruction Manual

Auto Clock Set

This menu is used to set the current time. You need to set
the time to use timer recording.
With the unit in Stop mode, press the MENU button.
1
No Disc
❷
2
Using the buttons, move the selection bar to
"Setup" then press Enter to select.
3
Select Clock Set using the
❿
the or ENTER button.
No Disc
24 - English
❷
buttons, then press
4
Select Auto Clock Set using the
❿
press the or ENTER button.
No Disc

Auto Clock Set

Manual Clock Set
You must have the antenna connected to set the
Auto Clock. See page Antenna Connections
Note
The Clock will be automatically set when you turn
off the recorder.
Select the sub menu (Clock Data CH, Time Zone or
5
Daylight Saving) using the
❿
the or ENTER button.
No Disc
Clock Data CH
Time Zone
Daylight Saving
Clock Data CH
Select a channel that carries a time signal using the
❷
buttons then press the
Select Auto to set the channel automatically.
No Disc
Select channel :
❷
buttons, then
Clock Set
❷
buttons, then press
Auto Clock Set
: Automatic
: Automatic
: Automatic
❿
or ENTER button.
Clock Data CH
Auto