Connecting & Setting Up; Quick Overview - Samsung DVD-VR300 Instruction Manual

Connecting &
Setting Up
• Quick Overview . . . . . . . . . . . . . . . . . . . 14
• Unpacking . . . . . . . . . . . . . . . . . . . . . . . 15
• Connecting the Antenna Cable . . . . . . . . 15
• Connecting the Video Cable . . . . . . . . . . 16
• Connecting the Audio Cable . . . . . . . . . . 18
• Connecting External Devices . . . . . . . . . 20
• Connecting the Power Cord . . . . . . . . . . 21
• Preparing the Remote Control . . . . . . . . . 21
14 - English

Quick Overview

A Quick overview presented in this guide will give you
enough information to start using the recorder.
Step 1 : Unpacking
❷
Step 2 : Connecting the Antenna Cable
❷
Step 3 : Connecting the Video Cable
❷
Step 4 : Connecting the Audio Cable
❷
Step 5 : Connecting External Devices
❷
Step 6 : Connecting the Power Cord
❷
Step 7 : Preparing the Remote Control
Note to CATV system installer :
•
pro-video to call CATV system installer' s attention to
Article 820-40 of the National Electrical Code (Section 54
of Canadian Electrical Code, Part I), that provides guide-
lines for proper grounding and, in particular, specifies that
the cable ground shall be connected to the grounding sys-
tem of the building as close to the point of cable entry as
practical.
This reminder is