Using The Markers - Samsung DVD-TR520 Instruction Manual

Using the Markers

You can set marks on a disc so that you can start
playback from the marked position.
This function is available on the R tray in the VR mode.
Using the MARKER button
1 Press the MARKER button during playback.
-- -- -- -- -- -- -- -- -- --
Marker
Using the ANYKEY button.
• Press the ANYKEY button during playback.
Search
√ √
Navigation
Marker
√ √
Subtitle
√ √
Audio
√ √
Repeat
Zoom
√ √
Select Tray
Disc Manager
• Press the ...† buttons to select Marker,
then press the ENTER or
52 - English
(VR mode)
N:0
SELECT RETURN
√ √
button.
Press the ENTER button when the desired scene
2
appears.
• The number 01 is displayed and the scene is memorized.
01 -- -- -- -- -- -- -- -- --
Marker
√ √ PLAY
MOVE
Press the œ √ buttons to move to the next position.
3
Press the ENTER button again when the desired
4
scene appears.
• The number 02 is displayed and the scene is
memorized.
Marker 01 02 -- -- -- -- -- -- -- --
√ √ PLAY
MOVE
• DVD-RAM or DVD-RW (VR Mode) discs have the
Marker function instead of the Bookmark function.
The Marker function allows you to mark up to 99
scenes. Since the scenes may be displayed as many
different pages, numbering is necessary. If a disc in
use is encoded with Cartridge Protection or Disc
Protection, Markers cannot be set or deleted. Only
playback is available.
When the disc tray is opened and then
closed, marks will disappear.
NOTE
N:1
CANCEL RETURN
N:2
CANCEL RETURN