Timer Recording - Samsung DVD-TR520 Instruction Manual

Video
The disc revolves, but no image or bad quality
images are displayed.
Check whether there is damage to or
Checkpoint 1
any foreign material on your disc.
Some low quality discs may not play
Checkpoint 2
properly.
If scenes change from dark to bright
Checkpoint 3
suddenly, the screen may shake
vertically temporarily, but this is not a
fault.
Sound
No sound.
Are you watching a program in slow
Checkpoint 1
or skip mode?
If you are playing a program at a
speed other than normal speed,
sound will not be heard.
Check the connections and settings.
Checkpoint 2
Check whether the disc is damaged.
Checkpoint 3 Clean the disc, if necessary.
Check whether the disc is inserted
Checkpoint 4
correctly with the label facing up.
No audio output.
Check whether you have selected
Checkpoint 1
the correct digital output options in
the Audio Output Options menu.
(See page 36.)

Timer Recording

Timer lamp flickers.
Check there is enough space in the
Checkpoint 1
disc for recording.
Checkpoint 2 Check whether the current disc is
recordable or not.
Make sure to check before the start
time of recording.
Timer recording does not work properly.
Re-check the recording time and the
Checkpoint 1
end time settings again.
Checkpoint 2
Recording will be canceled if the
power is interrupted due to a power
failure or another similar reason
while recording.
English - 111