Specifications For Jdp-20Vs Series Drill Press - Jet JDP-20VS-3 Operating Instructions And Parts Manual

4.0 Specifications for JDP-20VS series Drill Press

Model number
Stock number
Motor and Electricals
Motor type
Horsepower
Phase
Voltage
Cycle
Listed FLA (full load amps)
Motor speed
Power cable
Main Power plug
Work light
Work light power cable
Power transfer
Gear ratio
Recommended overcurrent protection
Capacities
Drills to center of circle
Drilling capacity, cast iron
Drilling capacity, mild steel
Tapping capacity, cast iron
Tapping capacity, mild steel
Spindle to table distance, maximum
Spindle to base distance
Spindle to column distance
Coolant capacity (optional)
Spindle
Spindle taper
Number of spindle speeds
Spindle speed range
Spindle travel
Rotation
Table and Column
Table size LxW
Table working surface
Table effective travel (w/o rack adjustment)
Table max. travel (with rack adjustment)
Number of T-slots
T-slot size
T-slot centers
Table weight capacity
Column diameter
Base
Base size
Base working surface
Number of T-slots
T-slot size
JDP-20VS-1
354230
1
115/230 V
(prewired 115V)
25/13
1720 RPM
SJT 12AWG, 6 ft.
SVT 18AWG, 6 ft. with 110V plug
1
30A (115V)
15A (230V)
1 in. (25.4 mm)
300 – 2,000 RPM
18-1/8 x 14-3/4 in. (460.4 x 375 mm)
6
JDP-20VS-3
354231
TEFC induction
2 HP (1.5kW)
3
230/460 V
(prewired 230V)
60 Hz
7/3.5
AWM 14AWG, 4 ft.
Not provided
6W, 12V DC, input 110V AC
Belts
(center pulley) 27T / 62T (spindle)
15A
20 in. (508 mm)
1-1/4 in. (31.8 mm)
n/a
n/a
30-1/4 in. (768.4 mm)
43-1/2 in. (1105 mm)
10-7/16 in. (265 mm)
2 gal. (7.6 L)
MT-3
Variable
6 in. (152.4 mm)
Fwd/rev
22 x 18-3/4 in. (559 x 476.3 mm)
15 in. (381 mm)
20 in. (508 mm)
3
5/8 in. (16 mm)
3-3/4 in. (95 mm)
154 lbs. (70 kg)
4-1/2 in. (114.3 mm)
27 x 19 in. (686 x 482.6 mm)
15 x 12 in.(380 x 304mm)
2
5/8 in. (16 mm)
JDP-20VST
354240
3
230 V only
7/6.6
1720/850 RPM
SJT 14AWG, 6 ft.
SVT 18AWG (to box)
15A
1-3/8 in. (35 mm)
3/4 in. (19 mm)
5/8 in. (15.9 mm)
150 – 2,000 RPM