Installing The Unit; Connecting External Components - Kenwood DDX419BT Instruction Manual

Installation and Connection Installation and Connection

Installing the unit

Installing the unit using the mounting
brackets removed from the car
π / [
Note: Select the appropriate screws (supplied) for the
mounting bracket.
Installing the trim plate
(Only for DDX4019BT)

Connecting external components

π / [
Car bracket
1 Navigation input (NAV)*1
2 Steering wheel remote controller input (REMO-IN)
• Connect to the car's steering remote harness
using the steering remote cable ("). Contact
your KENWOOD dealer for details.
3 Microphone input (MIC) (Page 44)
4 Audio video input (AV-IN)
Connect the following type of 4-pole mini plug:
1 3
24
5 Video output (V-OUT)
6 Rear view camera input (R-CAM)
7 Output terminals*2
*1 Not available for Indonesian models.
*2 When connecting an external amplifier, connect its ground wire
1 Left audio
2 Right audio
3 Ground
4 Composite video
• Left output (White)
• Right output (Red)
REAR: Rear speaker preouts
FRONT: Front speaker preouts
SW: Subwoofer preouts
to the chassis of the car; otherwise the unit may be damaged.
ENGLISH 43