Ipod/Iphone - Kenwood DDX419BT Instruction Manual

iPod/iPhone

iPod/iPhone
Connecting an iPod/iPhone
• For playable iPod/iPhone types and other
information, see page 47.
• You cannot watch video.
Wired connection
iPod/iPhone iPod/iPhone 30-pin
Lightning model connector model
(commercially available) (commercially available)
USB Audio cable
for iPod/iPhone:
KCA-iP103 (optional
accessory)
Rear panel
The source changes to "iPod" and playback starts.
Bluetooth connection
Pair the iPod/iPhone with this unit via Bluetooth.
(Page 22)
Selecting the playback device via the
connection method
See <Smartphone Setup> on page 34 for more
information.
Playback operations
Playback information and key operation
• For playback information, see "Source control screen"
on page 7.
• For key operations on the touch panel, see "Common
USB Audio cable
operation keys on source control screen" on
for iPod/iPhone:
page 8.
KCA-iP102 (optional
accessory)
Additional keys operations: Touching the operation
keys performs the following actions.
[ ]
Selecting an audio file from the menu
1
Display the audio menu.
On the source control screen, touch as follows:
Switches the device on the
<Smartphone Setup> screen.
(Page 34)
2
Select a category ( 1 ), then select a
desired item ( 2 ).
iPod
Artist 000000001
Playlists
Artist Artist 000000002
Album Artist 000000003
Songs Artist 000000004
Podcasts Artist 000000005
Select an item in each layer until you reach and
select the desired file.
• Available categories differ depending on the type
of iPod/iPhone.
Settings for iPod/iPhone playback
1
Display the <iPod Mode> screen.
On the source control screen, touch as follows:
2
Make the settings.
iPod Mode
ON OFF
Artwork
<Artwork>
• ON (Initial): Shows the artworks of the playing
files.
• OFF: Hides the artworks of the playing files.
ENGLISH 15