Radio
Radio
Listening to the radio
The unit switches to FM alarm scene automatically
when receiving an alarm signal from FM broadcast.
Playback information on the source control
screen
Radio
1 Selects the band (AM/FM1/FM2/FM3)
2 Current station frequency/RDS status
3 Text information
• Touching [<] scrolls the text if not all of the text
is shown.
• Touching [Radio Text] switches the information
between Radio Text, Radio Text Plus and PTY
code.
4 Displays the preset stations window (Page 17)
5 [P1] – [P5]
• (Touch) Selects a preset station.
• (Hold) Presets the current station.
6 Displays/hides other available operation keys*
7 NEWS indicator
8 AF indicator
16
ENGLISH
9 TI indicator
p Operation keys*
q ST/MONO indicator
The ST indicator lights up when receiving an FM
stereo broadcast with sufficient signal strength.
w Seek mode indicator
e LO.S indicator
r RDS indicator
t EON indicator
The EON indicator lights up when a Radio Data
System station is sending EON signals.
* See the following "Operation keys on source control screen".
Operation keys on source control screen
• The appearance of the operation keys may differ,
however the similar operation keys have the same
operations.
• See also "Common operation keys on source control
screen" on page 8.
Touching the operation keys performs the following
actions:
6
(Hold) Presets stations automatically.
[AME ]
[MONO]*1
Activates monaural mode for better FM
reception (stereo effect will be lost).
• The MONO indicator lights up while
monaural mode is activated.
• To deactivate, touch [MONO] again.
[TI]*1
(For FM RDS features)
Activates TI standby reception mode.
• When TI is activated, the unit is ready
to switch to traffic information if
available. The TI indicator lights up in
white.
• If the TI indicator lights up in orange,
tune into another station providing
Radio Data System signals.
• The volume adjustment for Traffic
Information is automatically
memorized. The next time the unit
switches to Traffic Information, the
volume is set to the memorized level.
• To deactivate, touch [TI] again.
[MODE]*1
Changes the settings for radio reception
on the <Radio Mode> screen.
p
[PTY]*1*2
(For FM RDS features)
Enters PTY search mode.
1 Touch [PTY].
2 Touch and hold a PTY code to search
for.
If there is a station broadcasting a
program of the same PTY code as you
have selected, that station is tuned in.
[SEEK]
Changes the seek mode for [
• AUTO1 (Initial): Auto search
• AUTO2: Tunes in preset stations one
after another
• MANU: Manual search
S
]/[
T
].