Kenwood DDX419BT Instruction Manual page 37

Settings Settings
[USB 1 Wire] Select this when the device is
connected via the USB input
terminal (cable from the rear
panel).
[Bluetooth] Select this when the device is
connected via Bluetooth. (Go to
step 3.)
If [Android/Other] is selected in step 1:
Smartphone Setup
Bluetooth
Next
The <Paired Device List> screen appears. Go to
step 3.
3
When selecting [Bluetooth] as the
connection method: Select the device (
then touch [OK] ( 2 ) to connect.
• If the device is already connected, skip step 1.
Paired Device List
Device Name 1
Device Name 2
OK
Device Name 3
Connection
Device Name 4
Device Name 5 Remove
<Bluetooth Setup>
Configure settings for using a Bluetooth device, such
as connection and other general operations. For
details, see "Bluetooth settings" on page 27.
<Beep>
• ON (Initial): Activates the key-touch tone.
• OFF: Deactivates the key-touch tone.
<SETUP Memory>
Memorize, recall, or clear the settings you have made.
• The memorized settings are kept even when the unit
is reset.
• Available only when <SETUP Memory> is set to
[Unlock] (selected initially).
Touch [Yes] to display the setting screen, then select
an operation:
• Recall: Recalls the memorized settings.
• Memory: Memorizes the current settings.
• Clear: Clears the currently memorized settings and
1 ),
return to the factory (initial) settings.
• Cancel: Cancels.
A confirmation message appears. Touch [Yes].
You can also set to lock the <SETUP Memory> from
being changed. Touch [Lock] to lock the settings.
• Some items in <Setup> menu, e.g. <Speaker/
X'over>, cannot be adjusted when [Lock] is
selected.
<DivX(R) VOD>
This unit has its own Registration Code. Once you
have played back a file with the Registration Code
recorded, this unit's Registration Code is overwritten
for copyright protection.
• Touch [Enter] to display the information.
• To return to the previous screen, touch [OK].
<Security Code>
Register the security code for the unit. (Page 5)
<Serial Number>
(Not applicable for Indonesian models)
Displays the serial number.
<Touch Panel Adjust>
Adjust the touch positions of the buttons on the
screen.
Touch the center of the marks at the upper left (1),
the lower center (2), then the upper right (3) as
instructed.
Touch Panel Adjust
Cancel
• To reset the touch position, touch [Reset].
• To cancel the current operation, touch [Cancel].
Reset
ENGLISH 35