System Settings - Kenwood DDX419BT Instruction Manual

Settings Settings
<Guidelines Setup>
Adjust the parking guidelines according to the size of
the car, parking space and so on.
When adjusting the parking guidelines, make sure to
use the parking brake to prevent the car from moving.
Select the mark (1), then adjust the position of the
selected mark (2).
Initialize
Make sure that A and B are horizontally parallel, and
that C and D are the same length.
• Touch and hold [Initialize ] for 2 seconds to set all
the marks to the initial default position.
<Navigation>
(Not applicable for Indonesian models)
Change the navigation settings.
<Guidance>
Select which front speakers are used for the navigation
guidance.
<Volume>
Adjust the volume (0 to 35) of the navigation guidance.
34 ENGLISH
<NAV Mute>
• ON (Initial): Attenuates the sound coming out
of speakers other than the front speakers during
navigation guidance.
• OFF: Cancels the attenuation.
<NAV Setup>
Press [Enter] to display the setup screen for the
navigation unit. See the instruction manual supplied
for the navigation unit.

System settings

Display the <System> screen.
On the Home screen, touch as follows:
Then, on the <Setup> screen, touch [System].
Setup
Audio Language
English
Clock
Display Enter
Smartphone Setup
Input Enter
Bluetooth Setup
System Enter
Beep
ON OFF
E.g. System settings screen for DDX419BT
<Language>
Select the text language used for on-screen
information. For details, see "Initial settings" on
page 5.
"Please Power Off" appears when the setting is
changed. Turn off the power, then turn on to enable
the change.
<Clock>
Set the clock. For details, see "Clock settings" on
page 6.
<Smartphone Setup>
Specify the connection method of Android/iPod/
iPhone.
1
Select the device type ( 1 ), then touch
[Change] ( 2 ).
Smartphone Setup
Initial Information
Device Type iPod / iPhone
Connection Type Bluetooth
Device Name Device Name
Device Type Select
iPod / iPhone Android / Other Change
2
Select the connection method (
confirm the selection ([OK] or [Next]) (
If [iPod/iPhone] is selected in step 1:
Smartphone Setup
USB 1 Wire Bluetooth
OK
1 ), then
2 ).