Special System Settings - Kenwood DDX7019BT Instruction Manual

Settings Settings

Special system settings

Display the <Special> screen.
On the Home screen, touch as follows:
Then, on the <SET-UP> screen, touch [Special].
<DEMO>*
• ON (Initial): Activates the display demonstration.
• OFF: Deactivates the display demonstration.
* Some features are not selectable when [ON] is selected.
<Manual Power OFF>
B
Assign the function of the button or HOME button
on the monitor panel when pressed and held.
• AV OFF: Turns off the screen and audio.
The screen and audio restores when receiving call,
inputs video signal from the rear view camera, etc.
• Complete OFF (Initial): Turns off the power.
<SET-UP Memory>
• Lock: Locks the <Audio SETUP Memory>/<Audio
SETUP Recall>/<Audio SETUP Clear> settings.
– The items in the <Speaker/X'over> settings
cannot be adjusted when [Lock] is selected.
• Unlock (Initial): Unlocks the settings.
<Audio SETUP Memory>*
Memorizes the following audio settings:
• Fader/Balance
• Speaker/X'over
• Equalizer (Adjustment on user preset ([User1] –
[User4])/Subwoofer level adjustment)
• Position/DTA
• Sound Effect
A confirmation message appears. Touch [Yes].
* Selectable only when <SET-UP Memory> is set to [Unlock].
<Audio SETUP Recall>*
Recall the settings memorized by <Audio SETUP
Memory>.
A confirmation message appears. Touch [Yes].
* Selectable only when <SET-UP Memory> is set to [Unlock].
<Audio SETUP Clear>*
Clear the settings made on the <Audio> screen.
A confirmation message appears. Touch [Yes].
* Selectable only when <SET-UP Memory> is set to [Unlock].
<Software Information>
Display the information of the software (such as serial
number, application version, system version, etc.). You
can update the software.
<Open Source Licenses>
Show the Open Source Licenses.
<Initialise>
Initialize all settings made on the unit.
A confirmation message appears. Touch [Yes].
• The settings memorized on the <Audio SETUP
Memory> are not initialized.
ENGLISH 43