Intended Use; Technical Description; Installing The Seat Heater - Dometic MAGICCOMFORT MSH60 Installation And Operating Manual

Intended use

5 Intended use
The seat heater MagicComfort MSH60 (ref. no. 9600000393) and MSH601
(ref. no. 9600000394) are designed for installation in the front vehicle seats.
A
NOTICE!
For vehicles equipped with side airbags in the seat backrests, seat
occupancy detection or child seat detection, observe the vehicle
manufacturer's specifications.
6

Technical description

The heating elements for the seat heater MagicComfort MSH60 and MagicComfort
MSH601 can be installed in the driver's seat and in the passenger seat.
The shape of the seat is not altered by the heating elements.
The seat heater is operated using a switch.
7

Installing the seat heater

Tools required (fig. 1, page 3)
7.1
For installation and assembly you will need the following tools:
• Drill bit set (1)
• Drill (2)
• Screwdriver (3)
• Set of ring or open-ended spanners (4)
• Measuring ruler (5)
• Hammer (6)
• Centre punch (7)
To make and test the electrical connection, the following tools are required:
• Diode test lamp (8) or voltmeter (9)
• Crimping tool (10)
• Insulating tape (11)
• Hot air blower (13)
12
MSH60, MSH601
EN