Standards And Approvals; Fcc Compliance Statement - Epson SureLab D700 Operation Manual

Hide thumbs Also See for SureLab D700:
Table of Contents

Advertisement

Weight
Dimensions

Standards and Approvals

Safety
UL 60950-1
CAN/CSA No. 60950-1
Low Voltage Directive 2006/95/EC
EMC
FCC part 15 subpart B class A
CAN/CSA-CEI/IEC CISPR 22 Class A
AS/NZS CISPR 22 Class A
EMC Directive 2004/108/EC
Warning:
C
This is a class A product. In a domestic environment this product may cause radio interference in which case the
user may be required to take adequate measures.

FCC Compliance Statement

For United States Users
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful
interference, in which case the user will be required to correct the interference at his own expense.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2)this device must accept any interference received, including interference that may cause undesired operation.
WARNING
The connection of a non-shielded equipment interface cable to this equipment will invalidate the FCC Certification
of this device and may cause interference levels which exceed the limits established by the FCC for this equipment.
It is the responsibility of the user to obtain and use a shielded equipment interface cable with this device. If this
equipment has more than one interface connector, do not leave cables connected to unused interfaces. Changes or
modifications not expressly approved by the manufacturer could void the user's authority to operate the equipment.
Appendix
General Specifications
Approx. 50. 7 lbs (23 kg) (printer only)
18.1 inches (460 mm) W x 16.9 inches (430 mm) D x 13.9 (354 mm) H
EN 60950-1
EN 55022 Class A
EN 55024
EN 61000-3-2
EN 61000-3-3
97

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents